Perguntas frequentes

You can find out contents quickly by selecting or searching the keyword what you’re looking for.

Q

I entered the IP address during the installation of the ST45-ETN product, but I get an error. How should I proceed?Smart Factory

A

The installation method for ETN special control tower lights is as follows: ▶ Search for the product name > Download the user manual > Follow the step-by-step guide in the manual. [Download]

Q

Is there a signal tower light that can be connected to a PC?Smart Factory

A

Tower lights that can be connected to a PC include wireless control products, USB control products, and ETN control products.

Please visit our website for more information:
▶ Go to "Products > Smart Factory" [Detail View]

Q

Can you recommend an ETN product with an adjustable buzzer sound? Smart Factory

A

Among the special control tower lights, the QTG-ETN series, QTC-ETN series, and QTR-ETN series have adjustable buzzer sounds. The buzzer volume can be adjusted using the volume control switch located at the bottom of the product body.

Q

What is the maximum length of the USB cable for your products? Smart Factory

A

When extending the USB cable, a voltage drop may occur due to the extended cable length. Therefore, the maximum guaranteed cable length is up to 2 meters.

Q

I want to use the signal tower light products by applying voltage to each one. Could you explain the wiring method?Tower Lamp

A

1. DC type: Separate power supply method.
-Apply (+) or (-) power to the common line (black) and directly apply the opposite polarity to the remaining color wires. The polarity of the common line and the remaining power wires must be different.
2. AC type: Consists of two power lines and one common line, and the configuration may vary depending on the number of beacon lights.
-Apply AC power to the 0.75SQ (black, white) wires, and connect the 0.3SQ black wire to the cable.
-If you wish to use the same wiring method as the DC type, please specify "DC Voltage for Each Terminal" when placing your order.

Q

Please let me know the types of signal tower light mounting bases and how to mount them.Tower Lamp

A

Types of mounting bases for tower lights:

1. SCREW & NUT: Qlight standard option. It has a threaded pole end, and a nut is attached for mounting.
2. LB□□: A standard pole mounting product with an "L-shaped" mounting bracket used for mounting the product on vertical surfaces like walls.
3. SZ□□: A round mounting base used for horizontal surface installation. Made of aluminum and silver in color.
- QZ□□: Similar to SZ□□ but made of PC and black in color.
4. LW□□: A premium vertical mounting bracket used for mounting on vertical surfaces like walls. The cable can be drawn out from the bottom of the pole, and the bottom of the pole is threaded to allow the attachment of a cable connector for flexible conduits.
For other mounting brackets, please check our website:
5. SL□□: This is a round mounting bracket used for installing the product on a horizontal surface, and it can be adjusted 180 degrees from the ground.
- QL□□: This bracket serves the same purpose as the SL□□ but is made of PC material and is black in color.
For information on other mounting bracket products, please visit our website.
▶ Go to "Customer Support > Signal Light > Tower Light Mounting Brackets" for more details on our website. [Detail View]

Q

What is the difference between NPN and PNP in the signal tower light wiring method?Tower Lamp

A

The basic specifications for DC lighting include a built-in bridge circuit for non-polarized wiring, allowing compatibility regardless of NPN or PNP types.

However, for DC flashing types and AC products, please check compatibility with the transistor (TR) type you intend to use by referring the manual or contacting us or a distributor.

▶ Example of DC Voltage for Each Terminal
1) NPN Transistor
-If the COM (black wire) is connected to the (+) polarity, the transistor (TR) connected to the other signal lines must use NPN, with the emitter terminal connected to the (-) power.
2) PNP Transistor
-If the COM (black wire) is connected to the (-) polarity, the transistor (TR) connected to the other signal lines must use PNP, with the emitter terminal connected to the (+) power.
3) NPN and PNP Transistors types are used depending on the polarity of the power applied to the common line.

Q

Can the length of the signal tower light be customized?Tower Lamp

A

Yes, the length of tower lights can be customized.

1. Fixed total length adjustment: The total length can be specified when ordering as an optional feature.

2. Flexible length: If you require flexible length of tower light, a double-layer pipe option is available. Please ask this option if necessary.

For inquiries, visit our website:
▶ Go to Contact Us on our website [Detail View]

Q

I connected the flashing common wire to the ST80BF-3-110-RAG for flashing operation, but it is steady mode only. How can I use it as a flashing mode?Tower Lamp

A

Instructions on power supply and wiring:
1. Power supply:
- Power is supplied through the power wire.
2. Flashing operation:
- By connecting the common signal wire (black) to the signal wire, the lamp operates in flashing mode.
3. Check wiring diagram:
- Enter the product name in the search bar on our website to check the wiring diagram. The user manual can also be downloaded from the product page.

Q

Which signal tower lights have UL certification? Tower Lamp

A

UL-certified tower lights can be confirmed on the product detail pages of our website.
▶ Website > Customer Support > Certificates > Select UL to view the products. [Detail View]

Our standard products do not have UL certification, but UL-certified products are available as an option. When ordering, please specify "UL certified" if you require this option.